download 2gig smkt3 345 red yellow green

Seconds and there is a chirp every 48 seconds. After 4 hours the 2GIG Control Panel displays a loss ofĪlarm Dirty Feature: When the alarm has been contaminated, the yellow LED blinks once every 8 If you are not getting a low battery warning at the panel, there are three possible causes for chirps (not just a low battery), and you would determine which is the cause by the delay in the LED flash:Īlarm Trouble: When the alarm has a general fault, the yellow LED blinks once every four secondsĪnd there is a chirp every 48 seconds. You will also want to ensure that the detector is mounted flush with the mounting plate once reinstalled to prevent a tamper. This will allow for a proper power down sequence. If indeed a low battery issue, you will want to remove the batteries for at least a minute before replacing the batteries and remounting. The manual recommends 3 AAA 1.5V 1100mAh PC2400 Duracell Procell or Energizer E92 batteries. How old is the unit? There should be a date code on the unit.

Before replacing the unit, you’ll want to ensure a few things first:

Download 2gig smkt3 345 red yellow green